Model Name: SR05E
MEASURES: 153 x 157 x 115 cm
TOTAL WEIGHT: 145kg
MAXIMUM LOAD: 200kg
OTHERS: Multiposition Backseat
310 mm support brackets for 6 Bodytone discs of 20 kg per arm (up to 240 kg for training).
Our machines are designed for a very broad spectrum of users, allowing the regulation of them to adapt to different user statures, from 150 to 200 cm approximately.
110×52 mm Steel pipe, 3 mm thick as per UNE EN 10219, quality s-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process by the 4-roller system to avoid deformation during the process, keeping its physical characteristics throughout the piece.
3 layers of paint. Steel pickling and stabilized by immersion of the parts in different degreasing solutions to ensure a perfect and complete cleaning of the base material. Antioxidant primer to ensure adequate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy paint.
Ergonomic and biomechanical study under our associated professional athletes. After a long design process; from the drawing of the sketch, prototypes making and tested by athletes our products are released to the market.
Perimeter closing welding in structural points and union plates.
10 mm plate-against Plate system, to avoid looseness and torsion in maximum effort areas. Ergonomic and biomechanical research optimized for every exercise.
10 mm thickness plates cut by laser with another 10 mm plate for reinforcement, for a smooth movement without looseness or torsion produced for the continuous usage or loading.
SFK double tapered roller bearing, allocated in closed bushing ensuring a constant direction movement.
SEAT AND BACK
Leather simile perspiration resistant, antibacterial, and antiallergenic. Back pad, seat pad, and rolls in foam 80 kg/m3 density that provides optimum support for your training and uniform contact. Resistant to deformation.
Anodized Aluminium, knurled for better grip.
Chromed seat post adjustable with 8 laser numbered positions.
Plate supports made in burnished steel, providing more stability to the machine. Turned Aluminium endings. Screw hardness 10.9. Regulation system by a single bolt made of technopolymer with 750 shear rate. 4 non-slip rubber bases.